OSHA 30-HOUR NYC CONSTRUCTION TRAINING COURSE with DOL Plastic Card
The OSHA 30-Hour Construction Industry Online Course (IACET CEU=3.0) includes a Declaration and is accepted by the New York Department of Buildings to meet the actively proctored online training requirements of New York City’s Site Safety Training Local Law 196. Additionally, this course satisfies the training requirements for construction supervisors and workers under NYC’s Site Safety Training (SST) mandate.- Get Official Plastic OSHA 10 Construction DOL Wallet Card.
- Complete at Your Own Pace from anywhere – 100% Online.
- Free Study Guide
RATING
LANGUAGE
ENG
DOL CARD
YES
DURATION
30-HR
About the NYC OSHA 30-Hour Course
What is the NYC OSHA 30-Hour Construction Training?
The OSHA 30-Hour Construction Online Training (IACET CEU=3.0) provides OSHA 30 certification online and meets the requirements set by the New York City Department of Buildings. This training equips NYC construction workers with a comprehensive understanding of construction-related safety hazards, helping to reduce injuries. Upon completion, participants will receive a Department of Labor Plastic Card, mailed to their provided address. NYC mandate workers to obtain this construction certification with other certifications.
Who Should Take the NYC OSHA Construction Training?
This online course is designed for foremen, supervisors, safety directors, and other NYC construction workers who need advanced training beyond the basics. For those outside the construction industry, we offer a general industry course.
What Are the Benefits of Obtaining the NYC OSHA 30-Hour Construction Course Online?
Earning the NYC OSHA 30 Construction certificate increases your earning potential and helps position you for promotions into management roles. This certification can lead to advancement into positions that require greater responsibility and leadership, especially in compliance with NYC’s Site Safety Training (SST) requirements.
The following are the benefits associated with enrolling in the OSHA online course:
- Training that is authorized by OSHA and adheres to its safety guidelines.
- Discounts available for group enrollment.
- Full online access, allowing participants to complete the course at their own convenience, 24 hours a day, seven days a week.
- Opportunities for participation in interactive exercises and quizzes.
- Analysis of real-world case studies.
- Availability of the course in Spanish.
- Provision of a Free OSHA Study Guide.
- 24/7 Access to an OSHA-authorized trainer or support desk to address inquiries.
- Completion Certificate.
- Official plastic OSHA DOL wallet card upon completion of the course.
Course Facts
What You’ll Receive
Certificate of Completion Department of Labor (DOL) Card
Duration
30 Hours
Learning Format
100% online, accessible anytime
Course Access
Available 24/7
Course Pace
Self-paced with progress-saving features
Course Updates
Regularly updated with the latest information
Course Credit
30 hours
NYC OSHA 30-Hour Course Overview
The NYC OSHA 30-Hour Construction Online Course (IACET CEU=3.0) provides OSHA 30 certification online and is tailored for field supervisors, foremen, superintendents, and safety directors working in New York City’s construction industry. This comprehensive training covers essential safety standards and focuses on the specific hazards present on NYC construction sites. It helps students develop a deep understanding of construction safety protocols, aiming to reduce injuries, ensure compliance with local regulations, and improve overall site safety.
Upon completion of the NYC OSHA 30-Hour Construction Course, students will receive an OSHA Department of Labor Plastic Card, which will be mailed to their provided address. This course also fulfills requirements for NYC’s Site Safety Training (SST) program, helping construction professionals stay compliant with local safety laws and enhance their careers.
Exam & Quiz Information
- Students must score at least 70% on each module quiz to proceed, with up to three attempts per quiz.
- The final exam includes 40 questions, requiring a 70% score to pass, with three attempts allowed.
- Successful completion awards a Department of Labor (DOL) Card.
- If unsuccessful after three attempts, the course must be repurchased and restarted.
NOTE: YOU MUST COMPLETE THE SURVEY AT THE END OF THE TRAINING TO RECEIVE YOUR DOL CARD
Course Objective
The objective of the NYC OSHA 30-Hour Construction Course is to provide workers with essential knowledge of construction safety hazards and OSHA 29 CFR 1926 standards. The course focuses on preventing common hazards such as falls, electrical safety, and proper PPE use, while ensuring compliance with NYC’s Site Safety Training (SST) requirements. It enhances workers’ ability to identify and address safety issues, reduce accidents, and understand their rights and responsibilities under OSHA and local laws, preparing them for leadership roles in enforcing safety protocols on construction sites.
Topics Covered
- OSHA Outreach Training Orientation
- OSHA 30-Hour Learner Responsibilities
- Introduction to OSHA (US)
- OSHA Inspections for Construction and Multi-Employer Worksites
- OSHA 300 Recordkeeping Requirements
- Job Hazard Analysis (JHA)
- Pre-Job Briefings
- Safety Signs (US)
- Personal Protective Equipment (PPE) Overview for Construction: Protective Characteristics
- Personal Protective Equipment Overview for Construction: Using and Maintaining PPE
- Hearing Conservation (US)
- Respiratory Protection Awareness (US)
- Crystalline Silica Awareness
- Lead Poisoning (US)
- Compressed Air Safety
- Dust Mask – Voluntary Use Guidelines
- Bench Grinder Safety
- Machine Guarding
- Hand and Power Tool Safety for Construction
- Hand, Wrist and Finger Safety
- Preventing Cuts and Puncture Wounds
- Struck By, Caught Between – Staying Out of the Line of Fire
- Work Zone Safety (US)
- Excavation and Trenching Safety
- Blocking and Cribbing
- Load Securement for Heavy Equipment (US)
- Concrete and Masonry Awareness
- Blasting Area Safety (US)
- Fall Protection (US)
- Aerial and Scissor Lifts
- Scaffold Safety Awareness
- Walking/Working Surfaces
- Guarding Floor Holes and Wall Openings (US)
- Ladder Safety for Construction (US)
- Slips, Trips and Falls for Construction
- Crane Operator Safety
- Crane Hand Signaling Part 1
- Crane Hand Signaling Part 2
- Basic Rigging Principles Part 1
- Basic Rigging Principles Part 2
- Health Hazards in Construction
- Hazard Communication
- Introduction to Industrial Hygiene (US)
- Using Eyewashes and Emergency Showers (US)
- OSHA 30-Hour Midway Progress Report
- Asbestos Awareness Introduction
- Asbestos Awareness Part 1
- Asbestos Awareness Part 2
- Asbestos Awareness Part 3
- Bloodborne Pathogens (BBP)
- Welding, Cutting and Brazing for Construction
- Pest Management
- Heat Stress
- Cold Stress
- Confined Space Awareness for Construction
- Hydrogen Sulfide (H2S) Awareness
- Safety Everywhere: Carbon Monoxide
- Compressed Gas Cylinder Safety (US)
- Stacking and Storage Practices for Construction
- Material Handling Practices for Construction
- Powered Industrial Trucks Operators Overview
- Preventing Back Injury
- Housekeeping on the Job
- Egress and Emergency Action Plans (US)
- Fire Extinguisher Safety: Part 1 – Fight or Flee
- Fire Extinguisher Safety: Part 2 – Using Extinguishers
- Hot Work for Construction.
Previous
Next
WHY LEARN WITH US
We’ve been trusted by millions of learners to provide their regulatory training.
You get simple to follow course content that you can access anytime, anywhere.
You’re in good hands. We’ve been in business for over 20 years.
We're here for you with online chat and toll-free phone support.
Buy 30-Hour Construction
$132
This course includes the plastic Official DOL card.
- Official OSHA DOL Card
- Downloadable Certificate
- Complimentary Study Guide
FAQS
What is the NYC OSHA 30-Hour Construction Course?
The OSHA 30-Hour Construction Online Course covers worker rights, employer responsibilities, and methods for identifying and preventing job-related hazards. Designed for safety directors, foremen, supervisors, and construction professionals, it provides essential safety training. While the course covers key topics, additional site-specific training and hands-on experience are required to meet OSHA standards. This course is mandatory for many NYC employers, unions, and jurisdictions, although it remains voluntary at the federal level.
How does this course work online?
Students will have access to our online LMS, enabling them to complete the course at their own pace, anytime, from home or work. They can start and stop the course as needed.
How will I get my Department of Labor (DOL) card?
Upon successfully completing the course, students will receive an OSHA 10 Construction DOL Plastic Card issued by the U.S. Department of Labor, delivered to the provided U.S. address.
Is the OSHA 10-Hour Construction Course accredited?
Yes, the course is accredited by the International Association for Continuing Education and Training (IACET).
How much time does a student get to complete the course?
Students have six months to complete the course.
Buy 30-Hour NYC Construction
$132
SELECT YOUR STATE
OSHA training has particular requirements in several states. Select your state from the list below: